P&ID to line list.
Every named line parsed into nominal size, material spec, service code, and sequence. Source and destination equipment paired from the drawing topology.
Three drawings included on a new account.
Every line, already on the sheet.
Every named line parsed into nominal size, material spec, service code, and sequence. Source and destination equipment paired from the drawing topology.
The line list ships as a spreadsheet, sized to drop into your piping register. The DEXPI export carries the topology link to equipment and instruments.
From drawing to schedule.
- 01UploadP&ID set
- 02ParseLine-number segments
- 03RouteFrom and To from topology
- 04ExportExcel or CSV
Every tag, in the convention it was drawn in.
A multi-site project with mixed conventions merges into one line list, every tag in the form its own sheet prints it.
- ISA 5.1PT-101, FCV-203, TIC-4407
- KKS10LAC01CT001, 20MAL10AA001
- IEC 81346=A1+B2-PT001
- DIN 19227PIRA+02-301
- NORSOK Z-DP-00220-PT-3201
- NEN Dutch HVACKB3DH02, XL7VK04
- Shell DEP12-PIT-0421
- In-house formatsPI-CRACK-101A
What lands in the piping register.
Any named line on the drawing, meaning a stroke that carries a line number printed alongside it. Process pipework, utility headers, instrument air tubing, and flare / vent relief lines are all included. Anonymous strokes without a line number are excluded.
- Every named line parsed into nominal size, material spec, service code, and sequence
- Source and destination equipment paired from the drawing topology
- Off-page connectors reconciled into a single line entry across sister sheets
- ASME B31.3, NORSOK, Shell DEP, Aramco SAES, and in-house conventions parsed
Common questions
What counts as a line?
Is the line number split into its parts?
Which line-numbering conventions are supported?
What happens to a line that continues on another sheet?
Does this work on scanned drawings?
What is included on signup?
Convert your drawings.
Upload a P&ID set in any drawing convention, get every named line parsed and routed, export Excel or CSV.
Three drawings included on a new account.