The same service, pointed at each job.
Tagsight is the same service pointed at different jobs to be done: P&ID digitization, revision comparison, PLC bid estimation, SIL verification, datasheet capture, cable schedule digitization. Pick the closest match below.
Pick the closest match.
Every job below runs the same read on the same drawing set. What changes is which register comes out first and which format it exports to.
Primary
Brownfield P&ID digitizationReconstruct as-built scope from legacy P&IDs that have not been redocumented in decades. Scans, photos, and CAD exports all are supported.P&ID revision comparisonDiff two P&ID revisions and produce an MOC-ready change report: added, removed, and modified tags with audit trail.Tie-in I/O list extractionBaseline the existing facility once, drag the new equipment region on the canvas to scope the tie-in, and export a merged tag table to TIA Portal, Studio 5000, or PLCCreator with the Change Report alongside.
By drawing standard and region
Regeltechniek puntlijst extractionRead NEN-tagged Dutch HVAC and regeltechniek drawings into a puntlijst with the I/O class on every point, keeping the original codes as printed.EMSR-Stellenliste extractionRead DIN-coded German R&I-Schemas into an EMSR-Stellenliste with the Signalart on every Stelle, keeping the DIN function codes as printed.KKS / RDS-PP Messstellenliste extractionRead KKS- and RDS-PP-coded power-plant drawings into a Messstellenliste with the Signalart on every Messstelle, keeping the full plant code as printed.Liste E/S from schémas TIRead French schémas TI into a liste des entrées/sorties with the type E/S on every repère, keeping the repères and désignations as printed.Lista de señales E/S desde el DTIRead Spanish DTI drawings into a lista de señales E/S with the tipo de señal on every etiqueta, keeping the etiquetas and descripciones as printed.IEC 81346 reference-designation extractionRead IEC 81346 reference-designated drawings into a signal list with the I/O class on every device, keeping the full =+- aspect designation as printed.Lista I/O dallo schema P&IRead Italian schemi P&I into a lista I/O with the tipo di segnale on every sigla, keeping the sigle and descrizioni as printed.
Moving off legacy tools
Moving off SmartPlant P&IDPull instrument, equipment, and line data out of SmartPlant P&ID drawings into structured documents your team can edit anywhere.Moving off AVEVA P&ID DiagramsExtract the data layer from AVEVA P&ID Diagrams without re-licensing the seat, then export to TIA Portal, Rockwell L5X, or Excel.Moving off AutoCAD Plant 3DLift instrument and line data from AutoCAD Plant 3D P&IDs into editable I/O lists, instrument indexes, and line lists.Moving off Excel-only workflowsStop hand-copying tags from PDFs into Excel. Get a structured I/O list, revision diffs, and PLC-ready exports.
Use cases
Build a commissioning-loop package from ISA-5.4 loop diagramsBuild a commissioning-loop package from your ISA-5.4 loop diagram set. Cross-references against the I/O list and exports to Excel, CSV, or JSON.Digitize a legacy cable schedule into a structured registerCable schedule digitization turns a legacy PDF or Excel schedule into a structured register reconciled against the instrument index for E&I engineers.Digitize ISA-20 instrument datasheets for procurement and asset recordsISA-20 datasheet digitization produces structured spec records by section: identification through certifications, vendor-fill cells noted per row.Estimate PLC scope from a P&ID set during bidPLC bid estimation from a P&ID set produces an I/O count by signal class, a card-sizing rollup, and a cabinet plan the estimator can defend at review.Migrate from a legacy DCS to a modern control platformDCS migration starts with the as-built I/O scope. Reconcile the P&ID set against the legacy point list, then export a tag table to the target platform.Plan a PLC retrofit from legacy P&IDsPLC retrofit starts by digitizing the legacy P&ID set, reconciling against the existing I/O list, then exporting to TIA Portal, L5X, or PLCCreator.Produce a switchgear register from single-line diagramsBuild a switchgear register, transformer schedule, and protection-device list from the SLD set. Reads ANSI, IEEE C37.2 device numbers, IEC 60617 symbols.Produce as-built handover documentation for plant turnoverPlant handover documentation for the controls slice comes from the as-built P&ID set: I/O list, instrument index, IFC-vs-as-built change report, CMMS JSON.Seed an asset digital twin from existing P&IDsSeed an asset digital twin's controls layer from your P&ID set. Instruments, equipment, and lines federate with a revision diff feed for ongoing updates.Translate instrument tags between engineering standards on a multi-region projectCross-standard tag translation converts tags, letter codes, and signal classes between ISA 5.1, KKS, DIN, NORSOK, and other engineering standards.Verify SIS scope and SIL allocation against P&IDsSIL verification needs a clean SIS inventory. Filter it from the P&ID set, separate from BPCS scope, and reconcile against the SRS and proof tests.
Run it on your drawings.
Upload a set and see the instruments, equipment, and lines it reads before committing to a plan.