Rockwell Studio 5000 Export.
Import P&ID Tags into Rockwell Studio 5000 as L5X
What you get.
An L5X file (Rockwell XML exchange format) containing controller-scoped tags for all extracted instruments. Tags are created with appropriate data types: BOOL for discrete signals (DI/DO) and REAL for analog signals (AI/AO). Compatible with both CompactLogix and ControlLogix platforms.
Compatible with.
- Rockwell Studio 5000 (all versions)
- RSLogix 5000
- CompactLogix controllers
- ControlLogix controllers
Export contains.
- Controller-scoped tag definitions
- Data type mapping (BOOL for DI/DO, REAL for AI/AO)
- Tag names from P&ID instrument tags
- Tag descriptions from extraction data
- L5X XML format for direct import
Three steps.
- 01UploadUpload your P&ID drawing (PDF, PNG, JPG, or TIFF)
- 02ReviewReview extracted instruments and edit anything that needs correction
- 03ExportClick Export, select Rockwell Studio 5000 Export, and download your file
Common questions
What is an L5X file?
L5X is the XML interchange format used by Rockwell Studio 5000 and RSLogix 5000. It carries controller and program content as plain text XML, which makes it the standard way to move tag definitions between projects without retyping them. A tag-only L5X contains the tag names, data types and descriptions, and no logic.
How are AI, AO, DI and DO signals mapped to data types?
Discrete signals map to BOOL and analog signals map to REAL. A DI or DO becomes a BOOL because it carries a single on or off state. An AI or AO becomes a REAL because it carries a scaled engineering value. Signal class therefore decides the data type, which is why the class has to be right on the I/O list before the export is generated.
Are the tags controller-scoped or program-scoped?
Controller-scoped. Controller scope makes each tag visible to every program in the project, which is what an instrument tag normally needs since more than one routine reads it. If a project convention requires program scope, move the tags after import rather than editing the L5X by hand.
Can I import into an existing Studio 5000 project?
Yes. File then Import into an open project merges the tag definitions in. Studio 5000 will prompt on any name collision, so import into a copy first if the controller already carries tags with the same names. Reviewing the collision list is usually faster than reconciling duplicates afterwards.
Do the P&ID tag names survive the import?
The tag name is carried through as it appears on the drawing, with any characters Rockwell does not accept in a tag name substituted. Rockwell tag names cannot contain hyphens or start with a digit, so a drawing tag such as 10-PT-101 will not survive verbatim. Check the naming rule your controller standard uses before the import, not after.
Which controllers does the file work with?
Both CompactLogix and ControlLogix, across Studio 5000 and the older RSLogix 5000. The format is the same for each. Older RSLogix versions can be stricter about the schema revision in the file header, so if an import is refused, check the version the project was created in first.
Try it with your own P&ID.
Upload a drawing. Export as Rockwell Studio 5000 Export, ready to import.