P&ID to valve list.
Your P&ID set becomes the valve list. Every valve on the drawing extracted as one row: tag, type, actuator, fail position, line connection, and the loop or safety function the valve participates in.
The valve list is already on the drawing.
Your P&ID set becomes the valve list. Every valve on the drawing extracted as one row: tag, type, actuator, fail position, line connection, and the loop or safety function the valve participates in.
The valve list ships as a spreadsheet, cross-referenced to the I/O list rows for the actuated valves and to the line list rows for the pipes they sit on.
From drawing to schedule.
- 01UploadP&ID set
- 02ClassifyControl / on-off / manual / safety
- 03PairLine and loop linkage
- 04ExportExcel or CSV
Every tag, in the dialect it was drawn in.
Each sheet's tag convention is read as-is. Tags are never silently rewritten to ISA. Multi-site projects with mixed conventions produce one merged valve list, with every tag in the form it was drawn in.
- ISA 5.1PT-101, FCV-203, TIC-4407
- KKS10LAC01CT001, 20MAL10AA001
- IEC 81346=A1+B2-PT001
- DIN 19227PIRA+02-301
- NORSOK Z-DP-00220-PT-3201
- NEN Dutch HVACKB3DH02, XL7VK04
- Shell DEP12-PIT-0421
- In-house formatsPI-CRACK-101A
One structured valve list, cross-referenced and ready to export.
- Tag, type, actuator, and fail position on every row
- Line connection and the loop or safety function
- Classified as control, on-off, manual, or safety
- Cross-referenced to the I/O list and line list rows
Common questions
What valve types appear?
How is fail position determined?
Are valve sizes and pressure ratings extracted?
Is the valve list cross-referenced to the I/O list?
Does this work on scanned drawings?
Convert your drawings.
Upload a P&ID set in any drawing convention, get a structured valve list with actuator and fail-position data, export Excel or CSV.