Bechtel.
A Bechtel megaproject sits across multiple trains, whatever standard the asset owner specifies, and a single IFC milestone that holds the instrument index, I/O list, and SIS register on the same date.
Three drawings included on a new account.
Bechtel P&ID Extraction for Megaprojects.
Bechtel megaprojects run under Shell DEP, Aramco SAES, or ADNOC AGES. I/O lists, instrument indexes, and equipment lists support document control.
Primary standard: Client-driven, Shell DEP, Aramco SAES, ADNOC AGES, etc.
What Bechtel project documentation expects.
- Project I/O list against whichever operator standard the project executes against, Shell DEP, Aramco SAES, ADNOC AGES, owner in-house
- Master instrument index across multi-thousand-page LNG, petrochemicals, mining drawing sets
- Equipment list keyed to vessels, pumps, compressors, packaged units, with parent-skid relationships preserved
- Line list per the operator-specific line-numbering family with pipe class, service, metallurgy
- SIS register per IEC 61511 segmented from BPCS
- Marshalling and I/O-card count estimated from the I/O list across multi-thousand-tag projects
- Revision comparison reports for IFC-to-IFD-to-AFC progression and turnaround MOC
Where Tagsight fits.
- Whatever client standard the project runs, Shell DEP, Aramco SAES, ADNOC AGES, NORSOK, ISA 5.1 comes through as drawn, with no per-project configuration
- Multi-thousand-page LNG and petrochemicals drawing sets process page-by-page so review starts on early pages while later pages are still working
- Cross-unit interlocks stay connected across megaproject drawing sets
- BPCS, SIS and FGS scope kept distinguishable for distinct sign-off paths
- Revision comparison produces the IFC-to-AFC change records that megaproject document-control workflows require
- Direct exports to TIA Portal, Studio 5000, PLCCreator, DEXPI for the controls handover step
Common questions
Does Tagsight handle multi-thousand-page megaproject drawing sets.
Yes. Drawing sets process page-by-page so review can begin on early pages while later pages are still working. Cross-unit interlocks stay connected across the full set.
Is Tagsight a Bechtel-approved or registered vendor.
Tagsight is independent. This page describes how Tagsight outputs serve engineers working on Bechtel-led projects. It does not represent a partnership, approval, or vendor-registration status with Bechtel.
Can Tagsight handle the multiple operator standards a megaproject portfolio touches.
Yes. Operator-specific tagging conventions, Shell DEP, Aramco SAES, ADNOC AGES, NORSOK, ISA 5.1 come through alongside the ISA 5.1 baseline with no per-project configuration.
How does revision comparison support IFC-to-AFC progression.
Upload each revision as a separate workspace project. The comparison view produces an added, removed, modified diff between any two revisions and exports a Change Report Excel for project document control.
Can the I/O list export feed our DCS or PLC vendor tool directly.
Direct exports cover TIA Portal XML, Studio 5000 L5X, PLCCreator CSV, DEXPI XML, and Excel. For a DCS build (Honeywell, Yokogawa, Emerson), the Excel export gives the controls engineer the reviewed I/O list to configure from.
Run it on your Bechtel projects.
Upload a P&ID set from a Bechtel project and get the I/O list, instrument index, and equipment list, in whichever standard the project runs.
Three drawings included on a new account.
Bechtel is referenced descriptively. Tagsight has no affiliation with Bechtel Corporation.