Saipem.
A Saipem offshore EPCI carries five reconciled registers across topside, subsea, and onshore receiving facilities, under whichever operator standard the asset runs. Cross-boundary signal traceability is the work.
Three drawings included on a new account.
Saipem P&ID Extraction for Offshore EPCI.
Saipem delivers EPC and EPCI across oil and gas, LNG, and energy transition with offshore and subsea scope. I/O lists support document control.
Primary standard: Client-driven plus Saipem internal practice
What Saipem project documentation expects.
- Project I/O list against the client-specified tagging convention
- Master instrument index covering topside, subsea, and onshore scope where the project spans them
- Equipment list keyed to vessels, pumps, compressors, manifolds, packaged skids
- Line list per the client line-numbering family with metallurgy and corrosion-allowance flags
- SIS register per IEC 61511 separated from BPCS
- FGS register where offshore scope drives fire-and-gas requirements
- Revision comparison reports for IFC-to-AFC progression
Where Tagsight fits.
- Operator-specific tagging conventions including NORSOK, Equinor TR, ADNOC AGES, and Eni standards come through as drawn
- Multi-page drawing sets covering topside, subsea, and onshore scope process in a unified workspace
- BPCS, SIS and FGS scope kept distinguishable
- Topside-to-subsea-to-onshore signals stay connected
- Revision comparison feeds project document control
- Direct exports to TIA Portal, Studio 5000, PLCCreator, DEXPI
Common questions
Does Tagsight handle topside, subsea, and onshore drawing sets in a single workspace.
Yes. Multi-system projects process in a unified workspace. Cross-system signals stay connected regardless of the page boundary.
Is Tagsight a Saipem-approved or registered vendor.
Tagsight is independent. This page describes how Tagsight serves engineers working at Saipem on EPC and EPCI projects. It does not represent a partnership, approval, or vendor-registration status with Saipem.
How does Tagsight handle the multiple operator standards Saipem projects span.
Operator-specific tagging conventions, NORSOK, Equinor TR, ADNOC AGES, Eni standards, ISA 5.1 come through without per-project configuration.
Can the export feed an offshore-platform DCS or PLC vendor tool directly.
Direct exports cover TIA Portal XML, Studio 5000 L5X, PLCCreator CSV, DEXPI XML, and Excel. For a DCS build (Honeywell, Yokogawa, Emerson), the Excel export gives the controls engineer the reviewed I/O list to configure from.
Run it on your Saipem projects.
Upload a P&ID set from a Saipem project and get the I/O list, instrument index, and equipment list, in whichever standard the project runs.
Three drawings included on a new account.
Saipem is referenced descriptively. Tagsight has no affiliation with Saipem S.p.A.